Sewage Collection and Treatmentfrom Flowserve
Click through for more information:
Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump – The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force, with only a fraction of the media contacting the impeller.
Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump – Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted.
ESP3 Chemical Vertical Sump Pump – Boasting the same casing, reverse vane impeller and CBL cover as the industry-leading Durco Mark 3 chemical process pump, the ESP3 is the only vertical wet-pit immersion sump pump to offer parts interchangeable with standard ASME B73.1 horizontal pumps.
FRBHJC Overhung Cantilever Sump Pump – The FRBHJC is a true stiff-shaft vertical cantilever design developed to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as numerous other industries, particularly when flushing liquids are not available or cannot be tolerated.
IPS APEX™ – IPS APEX is the industry’s most sophisticated tool for data acquisition, diagnostics and intelligent control. The IPS APEX solution helps users lower life-cycle costs by delivering actionable information to optimize process control and equipment operation.
IPS Power Monitor™ – This product is no longer available.
IPS Tempo™ – The IPS Tempo is a user-friendly, variable frequency drive (VFD) with pre-engineered optimization, protection and control features for rotating equipment. The IPS Tempo solution extends equipment life and lowers life-cycle costs. When connected to specific sensors, it can be configured to enable automated process control and sense detrimental operating conditions, such as closed valves, off-curve operation, dry-running and pump cavitation.
MF Overhung Solids Handling Pump – The Flowserve MF is an end-suction, side discharge, mixed flow, non-clog pump. This pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.
MN Large Capacity, Solids Handling Pump – The Flowserve MN is an end-suction, side discharge, mixed flow, non-clog pump. This large capacity pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.
MVE End Suction, Overhung Industrial Process Pump – The MVE mixed flow, single stage volute pump is designed to deliver high volume flow at low to medium heads. It provides reliable performance in numerous industrial, municipal and agriculture services.
PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ASME Chemical Process Pump – The Flowserve PolyChem M-Series ASME pumps are non-metallic magnetic drive pumps designed to meet ASME B73.1 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and high temperature performance.
SealSentry™ CRC Seal Chambers for ASME (ANSI) Process Pumps – With SealSentry CRC seal chambers, proven FML technology can now be deployed to extend mechanical seal life in popular pump models from Goulds, Griswold, Peerless and Summit.
CPXP Self-Priming ISO Chemical Process Pump – Operating on the reflux priming principle, the CPXP self-priming pump offers state-of-the-art hydraulics, versatile operation and reliable performance while costing considerably less to buy, install and maintain than submersible pumps.
Terra-Titan™ Cantilever Vertical Sump Pump – The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries.
Titan™ Slurry Heavy-Duty, Overhung, Radially Split, Lined Pump – The Flowserve Titan Slurry pump is a true mill circuit slurry pump. It reflects the company’s innovation and engineering expertise in hydraulic design, materials science and manufacturing excellence.
MJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump – The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The MJC is particularly well suited for applications in which flushing liquids are not available or cannot be tolerated.
QL and QLQ Vertical Double Suction, Twin Volute Wet Pit – The Flowserve QL vertical, double suction pump has a single impeller and true twin volute design that produces more head and can operate at higher speeds than conventional, multistaged vertical turbine models. It can be used in all wet pit applications and virtually eliminates erosion and corrosion of the shaft, bearings and all internal components.
Mark 3 ASME (ANSI) Standard Overhung Chemical Process Pump – The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ASME (ANSI) B73.1 design offers the industry’s most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM).
CPX ISO Overhung, Single Stage Process Pump – Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the CPX chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance enhancing benefits to minimize the total cost of pump ownership.
RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump – The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated.
RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump – The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.
MVX Solids Handling, Wet Pit – The Flowserve MVX is a rugged wet pit pump designed for use in solids handling applications and other wet pit services. Built and tested in accordance with Hydraulic Institute standards, the MVX non-clog pump boasts numerous reliability- and performance-enhancing benefits.
Mark 3 Unitized Self-Primer – The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources that have no positive pressure to naturally prime the pump.
WUJ ISO 13709/API 610 (VS1), latest ed. (VS1) Vertical Lineshaft, Multistage Wet Pit Pump – The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is designed for wet pit or deep well applications.
MSX Overhung, Solids Handling, Submersible Pump – The Flowserve MSX family of solids handling, submersible pumps is engineered to perform efficiently in the most challenging environments, from pumping raw sewage to moving industrial wastewater and solids-laden liquids.
FRBHJ Overhung, Vertical Lineshaft Sump Pump – The FRBHJ vertical lineshaft sump pump is suitable for to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as a broad range of process liquids in many other industries.
CPXM ISO Overhung, Close Coupled, Process Pump – Offering state-of-the-art hydraulics and a compact, space saving arrangement, the CPXM pump is designed for applications where high performance, superior efficiency and low NPSH are required. Conforms to ISO 2858 dimensional and technical standards and to ISO 5199 design criteria.
LNN Between Bearings, Axially Split, Single Stage Pump – The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications
VSMP Overhung, Vertical Cantilever, Immersion Pump – The VSMP vertical standard motor pump is a vertical immersion centrifugal pump designed for general industry use.
FRBH Heavy-Duty Paper Stock and Process Overhung Slurry and Solids Handling Pump – The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range, the high efficiency of the FRBH translates into low total cost of ownership.
Mark 3 Recessed Impeller, Overhung Chemical Process Pump – The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex action of a recessed impeller.
MJ Overhung, Vertical Lineshaft, Hard Metal Slurry Pump – The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and is suitable for a broad range of wet and dry pit applications.
Mark 3 In-Line Overhung Chemical Process Pump – The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading Mark 3A power end and other Mark 3 advanced features for maximum Mean Time Between Planned Maintenance (MTBPM).