Water Supply and Distribution

Water Supply and Distribution

from Flowrox and Flowserve

Byron Jackson SUBM Deep-Well Submersible (Oil-Filled Design) Pump –The Flowserve Byron Jackson SUBM submersible motor pump is an oil-filled unit built for the most demanding deep well services. Rugged, reliable and long lasting, these units offer significant total life cycle cost savings.

Request Quote
Category:

Description

Click through for more information:

CPXR Recessed Impeller ISO Chemical Process PumpThe Durco CPXR Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force through the open area in front of the impeller with little contact.

CSXThe Type CSX is a radially split, multistage, ring section pump designed for high pressure services.

DMX ISO 13709/API 610 (BB3) Between Bearings, Single Case, Axially Split, Multistage PumpThe Flowserve DMX is an axially split, multistage pump designed to API 610 (BB3), latest edition. DMX pumps are particularly well suited for process charge, pipeline and injection services where uncompromising reliability over wide ranges is imperative.

DS Overhung, Double Volute, End Suction Industrial Process Pump – This versatile end-suction pump features a double volute configuration that greatly reduces radial forces and produces a higher efficiency over the full range of the head-capacity curve than single volute counterparts.

Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump – With pump ends conforming to ISO 2858 and ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact, space-saving arrangement ideal for industrial processes or installations where space is at a premium.

Durco Mark 3 ISO Overhung, Chemical Process Pump – Conforming to ISO 2858 and ISO 5199 design criteria and incorporating advanced design features, the Durco Mark 3 ISO chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance-enhancing benefits to minimize the total cost of pump ownership.

Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump – The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force, with only a fraction of the media contacting the impeller.

Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump – Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted.

EC Between Bearings Single Case Axially Split Multistage Pump – The EC is a multistage, horizontal split case pump, designed to support large flow and high head applications in mining and water transmission applications. It can be mounted horizontally or vertically.

F-Line End Suction Multistage Industrial Process Pumps – The F-Line is a family of multistage, overhung pumps with excellent hydraulic efficiency and high suction lift capability, making them ideal for high pressure water applications. Available in several configurations, including the FP, the F-Line is built upon a modular platform that enables the pumps to be accurately sized for the required operating conditions.

HDX ISO 13709/API 610 (BB2) Between Bearings, Single Case, Radially Split, Single Stage Double Suction Pump – The HDX pump bridges the flow and pressure disparity between overhung and multistage process pump lines. Fully compliant with the latest ISO 13709/API 610 (BB2) standards, the HDX is engineered for safe, reliable performance at the elevated temperatures and pressures of refining and power applications.

IPS APEX™ – IPS APEX is the industry’s most sophisticated tool for data acquisition, diagnostics and intelligent control. The IPS APEX solution helps users lower life-cycle costs by delivering actionable information to optimize process control and equipment operation.

IPS Power Monitor™ – This product is no longer available.

IPS Tempo™ – The IPS Tempo is a user-friendly, variable frequency drive (VFD) with pre-engineered optimization, protection and control features for rotating equipment. The IPS Tempo solution extends equipment life and lowers life-cycle costs. When connected to specific sensors, it can be configured to enable automated process control and sense detrimental operating conditions, such as closed valves, off-curve operation, dry-running and pump cavitation.

LR Between Bearings, Single Case, Axially Split, Single Stage Pump – The LR family of pumps provides a broad range of hydraulic coverage and low total cost of ownership. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution.

ME Overhung, End Suction Industrial Process Pump – An extension of the popular MEN family of pumps, the ME offers reliable performance in larger capacity applications.

Pleuger SUBM Deep-Well Vertical Submersible (Water-Filled Design) Pump – The Pleuger SUBM submersible motor pump uses water-filled, wet-wound motors. This design is environmentally friendly, provides high efficiency and offers great reliability.

PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ASME Chemical Process Pump – The Flowserve PolyChem M-Series ASME pumps are non-metallic magnetic drive pumps designed to meet ASME B73.1 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and high temperature performance.

SealSentry™ CRC Seal Chambers for ASME (ANSI) Process Pumps – With SealSentry CRC seal chambers, proven FML technology can now be deployed to extend mechanical seal life in popular pump models from Goulds, Griswold, Peerless and Summit.

MENBLOC Close Coupled, Overhung Industrial Process Pump – MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical alternative to the frame-mounted ME.

LLR Between Bearing, Axially Split, Two Stage, General Industry Pump – The two stage LLR is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the vertical LRV. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution.

VCT Vertical Mixed Flow – VCT pumps are designed for extended operation in services where large capacities are required at relatively low pressures. Ideal for wet pit installations, VCTs offer multiple hydraulic combinations and design features to suit application needs.

Mark 3 ASME (ANSI) Standard Overhung Chemical Process Pump – The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ASME (ANSI) B73.1 design offers the industry’s most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM).

VPC Vertical Turbine, Double Case Pump – The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH available.

LRV Vertical, Between Bearing, Axially Split, Single Stage, General Industry Pump – The vertical, single stage LRV is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the two stage LLR. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution.

CPXP Self-Priming ISO Chemical Process Pump – Operating on the reflux priming principle, the CPXP self-priming pump offers state-of-the-art hydraulics, versatile operation and reliable performance while costing considerably less to buy, install and maintain than submersible pumps.

LPN ISO 13709/API 610 (BB1) Between Bearings, Single Case, Axially Split, Double Suction, Single Stage Pump – Fully compliant with the latest ISO 13709/API 610 (BB1) standards, the Flowserve LPN axial split case, medium pressure pump features the side/side nozzle configuration preferred for hydrocarbon and water transfer applications.

QL and QLQ Vertical Double Suction, Twin Volute Wet Pit – The Flowserve QL vertical, double suction pump has a single impeller and true twin volute design that produces more head and can operate at higher speeds than conventional, multistaged vertical turbine models. It can be used in all wet pit applications and virtually eliminates erosion and corrosion of the shaft, bearings and all internal components.

MEN Overhung, End Suction Industrial Process Pump – The rugged and reliable MEN end suction water pump is the preferred choice for general purpose water applications. Versatile and dependable, the MEN offers interchangeable parts among a wide variety of pump sizes and configurations.

CPX ISO Overhung, Single Stage Process Pump –Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the CPX chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance enhancing benefits to minimize the total cost of pump ownership.

NM Between Bearings, Single Case, Radially Split, Multistage, Ring Section Pump – The NM is a radially split, multistage, ring section pump designed for a wide range of process and industrial applications.

LC Overhung Chemical Slurry Pump – The LC chemical slurry pump is a horizontal, frame mounted, single stage, end suction design with a tangential discharge nozzle. It is engineered to withstand the rigor of applications that are both abrasive and corrosive.

BF and BFD Between Bearings, Axially Split Multistage Pumps – The BF and BFD are horizontal, axially split case, multistage centrifugal pumps adhering to ISO 13709/API 610 (BB1 and BB3) standards. Designed for medium to high flows, high heads and maximum efficiency, the single-suction BF and double-suction BFD are well suited for pipeline, refinery and waterflood services. Both configurations are available in 2-, 3- and 4-stage designs.

QLC and QLQC Vertical Double Case, Double Suction Twin Volute – The QLC and QLQC are double casing, double suction, vertical turbine pumps. Available in single or multistage units and featuring true twin volutes, these pumps incorporate the proven hydraulics of the QL and QLQ into a double casing configuration.

SMP Standard Motor Overhung Industrial Process Pump – The SMP standard motor pump is an overhung, end suction, close coupled, tangential discharge, frame mounted design, engineered for general industry use.

DVSH ISO 13709/API 610 (BB1) Between Bearings, Single Case, Axially Split, Single Stage Pump – With tens of thousands of units in operation around the world, the DVSH is the undisputed between bearings, axially split, single stage pump of choice. Fully compliant with the latest ISO 13709/API 610 (BB1) standards, the DVSH is particularly well-suited for use in process charge, transfer and pipeline services where uncompromising reliability over wide flow ranges is of utmost importance.

MVX Solids Handling, Wet Pit – The Flowserve MVX is a rugged wet pit pump designed for use in solids handling applications and other wet pit services. Built and tested in accordance with Hydraulic Institute standards, the MVX non-clog pump boasts numerous reliability- and performance-enhancing benefits.

UZDL 13709/API 610 (BB1) Between Bearings, Axially Split, Two Stage Pump – The UZDL is an axially split, two stage pump designed to the latest ISO 13709/API 610 (BB1) standards. With a double suction first-stage impeller, the UZDL pump is a natural solution for many low NPSH, high working pressure applications such as pipeline and transfer services. The pump fills the performance gap between the single stage DVS and multistage DMX pumps.

WUC ISO 13709/API 610 (VS6) Vertical, Double Case, Multistage Pump – Compliant with ISO 13709/API 610 (VS6), the Flowserve WUC vertical turbine is a radial flow or axial flow type, multistage, heavy-duty double casing pump. It is designed for continuous unspared duty at a variety of high-pressure services, operating at temperature extremes and handling difficult liquids.

Mark 3 Unitized Self-Primer – The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources that have no positive pressure to naturally prime the pump.

WUJ ISO 13709/API 610 (VS1), latest ed. (VS1) Vertical Lineshaft, Multistage Wet Pit Pump – The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is designed for wet pit or deep well applications.

CPXM ISO Overhung, Close Coupled, Process Pump – Offering state-of-the-art hydraulics and a compact, space saving arrangement, the CPXM pump is designed for applications where high performance, superior efficiency and low NPSH are required. Conforms to ISO 2858 dimensional and technical standards and to ISO 5199 design criteria.

LNN Between Bearings, Axially Split, Single Stage Pump – The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications.

CVP Vertical, Concrete Volute Wet Pit Pump – The Flowserve BSV and BCV concrete volute pumps are vertical, wet pit designs used for large flow applications requiring continuous operation. The massive concrete volute substantially reduces noise and vibration, offers high corrosion and erosion resistance, significantly increasing pump life.

LNNC Between Bearing, Axially Split, Single Stage Pump –The Flowserve LNNC is an axially split, double suction pump and is horizontally mounted with bottom suction and side discharge for maximum flexibility. Featuring 145 impeller and volute combinations, resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications.

Mark 3 Lo-Flo Overhung Chemical Process Pump – The Durco Mark 3 Lo-Flo pump is designed to improve pump reliability and performance in low-flow, high-head applications. Its innovative radial vane impeller and circular, concentric casing was developed to reduce radial loads and shaft vibration while extending bearing and mechanical seal life.

SMX Non-Metallic Standard Motor Overhung Industrial Process Pump – The SMX non-metallic motor pump is an overhung, end suction, close coupled tangential discharge, frame mounted design, engineered for general industry use.

Mark 3 Recessed Impeller, Overhung Chemical Process Pump – The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex action of a recessed impeller.

VTP Vertical Turbine, Wet Pit Pump – The VTP vertical turbine pump is a diffuser type, single or multistage design for continuous service in wet pit and deep well applications. With more than 300 bowl and impeller designs, the VTP provides unsurpassed hydraulic coverage to ensure the best pump selection for a wide variety of services.

Mark 3 In-Line Overhung Chemical Process Pump – The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading Mark 3A power end and other Mark 3 advanced features for maximum Mean Time Between Planned Maintenance (MTBPM).

Downloads

Reviews

There are no reviews yet.

Be the first to review “Water Supply and Distribution”

Your email address will not be published. Required fields are marked *

Go to Top