Water Treatment

Water Treatment

from Flowserve

AFV Vertical, Axial Flow Wet Pit Pump – The Flowserve AFV axial flow suspended shaft vertical pump is a single stage propeller type design. This family of pumps is specifically designed for low head movement of water for a multitude of municipal, agricultural and industrial services.

Request Quote
Category:

Description

Click through for more information:

CPXR Recessed Impeller ISO Chemical Process PumpThe Durco CPXR Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force through the open area in front of the impeller with little contact.

CPXS Magnetic Drive, Overhung, Chemical Process Pump

CPXV ISO and API Chemical Sump PumpCompliant with ISO 5199, the CPXV is a vertical sump pump incorporating state-of-the-art hydraulic design for efficient and reliable service. It is highly customizable to meet a wide range of needs. And, for oil and gas installations, the CPXV is available with many ISO 13709/API 610 compliant features.

CSX – The Type CSX is a radially split, multistage, ring section pump designed for high pressure services.

Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump – With pump ends conforming to ISO 2858 and ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact, space-saving arrangement ideal for industrial processes or installations where space is at a premium.

Durco Mark 3 ISO Overhung, Chemical Process Pump – Conforming to ISO 2858 and ISO 5199 design criteria and incorporating advanced design features, the Durco Mark 3 ISO chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance-enhancing benefits to minimize the total cost of pump ownership.

Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump – The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force, with only a fraction of the media contacting the impeller.

Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump – Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted.

ESP3 Chemical Vertical Sump Pump – Boasting the same casing, reverse vane impeller and CBL cover as the industry-leading Durco Mark 3 chemical process pump, the ESP3 is the only vertical wet-pit immersion sump pump to offer parts interchangeable with standard ASME B73.1 horizontal pumps.

IPS APEX™ – IPS APEX is the industry’s most sophisticated tool for data acquisition, diagnostics and intelligent control. The IPS APEX solution helps users lower life-cycle costs by delivering actionable information to optimize process control and equipment operation.

IPS Power Monitor™ – This product is no longer available.

IPS Tempo™ – The IPS Tempo is a user-friendly, variable frequency drive (VFD) with pre-engineered optimization, protection and control features for rotating equipment. The IPS Tempo solution extends equipment life and lowers life-cycle costs. When connected to specific sensors, it can be configured to enable automated process control and sense detrimental operating conditions, such as closed valves, off-curve operation, dry-running and pump cavitation.

MF Overhung Solids Handling Pump – The Flowserve MF is an end-suction, side discharge, mixed flow, non-clog pump. This pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.

MN Large Capacity, Solids Handling Pump – The Flowserve MN is an end-suction, side discharge, mixed flow, non-clog pump. This large capacity pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.

MVE End Suction, Overhung Industrial Process Pump – The MVE mixed flow, single stage volute pump is designed to deliver high volume flow at low to medium heads. It provides reliable performance in numerous industrial, municipal and agriculture services.

PVXM ISO 13709/API 610 (OH3) Vertical In-Line Overhung API Process Pump – The Flowserve PVXM vertical process pump features a diffuser design and a rugged in-line bearing housing. Compliant with the latest ISO 13709/API 610 and BS 4082R standards, the PVXM is a space-saving alternative to horizontal overhung process pumps in upstream and downstream services.

PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ASME Chemical Process Pump – The Flowserve PolyChem M-Series ASME pumps are non-metallic magnetic drive pumps designed to meet ASME B73.1 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and high temperature performance.

PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ISO Chemical Process Pump – The Flowserve PolyChem M-Series ISO pumps are non-metallic, magnetic drive pumps designed to meet ISO 2858 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and temperature allowance.

PolyChem S-Series Fluoropolymer Lined Overhung ASME Chemical Process Pump – The Flowserve PolyChem S-Series ASME pumps are non-metallic, conventionally sealed pumps designed to meet ASME B73.1 dimensional standards. The S-Series is designed with PFA-lined wet ends for superior corrosion resistance and temperature allowance.

PolyChem S-Series Fluoropolymer Lined Overhung ISO Chemical Process Pump – The Flowserve PolyChem S-Series ISO pumps are non-metallic, conventionally sealed pumps designed to meet ISO 2858 dimensional standards. The S-Series is designed with PFA-lined wet ends for superior corrosion resistance and temperature allowance

R Radially Split, Rubber Lined Overhung Slurry Pump – The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries

SealSentry™ CRC Seal Chambers for ASME (ANSI) Process Pumps – With SealSentry CRC seal chambers, proven FML technology can now be deployed to extend mechanical seal life in popular pump models from Goulds, Griswold, Peerless and Summit.

CPXP Self-Priming ISO Chemical Process Pump – Operating on the reflux priming principle, the CPXP self-priming pump offers state-of-the-art hydraulics, versatile operation and reliable performance while costing considerably less to buy, install and maintain than submersible pumps.

Terra-Titan™ Cantilever Vertical Sump Pump – The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries.

Titan™ Slurry Heavy-Duty, Overhung, Radially Split, Lined Pump – The Flowserve Titan Slurry pump is a true mill circuit slurry pump. It reflects the company’s innovation and engineering expertise in hydraulic design, materials science and manufacturing excellence.

MJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump – The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The MJC is particularly well suited for applications in which flushing liquids are not available or cannot be tolerated.

PolyChem GRP Engineered Polymer Composite Overhung Chemical Process Pump

QL and QLQ Vertical Double Suction, Twin Volute Wet Pit – The Flowserve QL vertical, double suction pump has a single impeller and true twin volute design that produces more head and can operate at higher speeds than conventional, multistaged vertical turbine models. It can be used in all wet pit applications and virtually eliminates erosion and corrosion of the shaft, bearings and all internal components.

MEN Overhung, End Suction Industrial Process Pump – The rugged and reliable MEN end suction water pump is the preferred choice for general purpose water applications. Versatile and dependable, the MEN offers interchangeable parts among a wide variety of pump sizes and configurations.

LRV Vertical, Between Bearing, Axially Split, Single Stage, General Industry Pump – The vertical, single stage LRV is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the two stage LLR. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution.

VPC Vertical Turbine, Double Case Pump – The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH available.

Mark 3 ASME (ANSI) Standard Overhung Chemical Process Pump – The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ASME (ANSI) B73.1 design offers the industry’s most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM).

MENBLOC Close Coupled, Overhung Industrial Process Pump – MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical alternative to the frame-mounted ME.

MENBLOC Close Coupled, Overhung Industrial Process Pump – MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical alternative to the frame-mounted ME.

CPX ISO Overhung, Single Stage Process Pump – Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the CPX chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance enhancing benefits to minimize the total cost of pump ownership.

RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump – The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated.

SMP Standard Motor Overhung Industrial Process Pump – The SMP standard motor pump is an overhung, end suction, close coupled, tangential discharge, frame mounted design, engineered for general industry use.

PHL ISO 13709/API 610 (OH2) Centerline Mounted Process Pump

RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump – The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.

PolyChem VGRP Engineered Polymer Composite Overhung Sump Pump – The PolyChem VGRP pump is a fiberglass, vertical immersion, open impeller type pump designed for corrosive wet pit applications in waste handling and chemical transfer. The PolyChem VGRP is available in seven sizes, with single-piece columns in 3 ft to 18 ft lengths.

WUC ISO 13709/API 610 (VS6) Vertical, Double Case, Multistage Pump – Compliant with ISO 13709/API 610 (VS6), the Flowserve WUC vertical turbine is a radial flow or axial flow type, multistage, heavy-duty double casing pump. It is designed for continuous unspared duty at a variety of high-pressure services, operating at temperature extremes and handling difficult liquids.

Mark 3 Unitized Self-Primer – The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources that have no positive pressure to naturally prime the pump.

WUJ ISO 13709/API 610 (VS1), latest ed. (VS1) Vertical Lineshaft, Multistage Wet Pit Pump – The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is designed for wet pit or deep well applications.

MSX Overhung, Solids Handling, Submersible Pump – The Flowserve MSX family of solids handling, submersible pumps is engineered to perform efficiently in the most challenging environments, from pumping raw sewage to moving industrial wastewater and solids-laden liquids.

FRBHJ Overhung, Vertical Lineshaft Sump Pump – The FRBHJ vertical lineshaft sump pump is suitable for to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as a broad range of process liquids in many other industries.

CPXM ISO Overhung, Close Coupled, Process Pump – Offering state-of-the-art hydraulics and a compact, space saving arrangement, the CPXM pump is designed for applications where high performance, superior efficiency and low NPSH are required. Conforms to ISO 2858 dimensional and technical standards and to ISO 5199 design criteria.

LNN Between Bearings, Axially Split, Single Stage Pump – The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications

LNNC Between Bearing, Axially Split, Single Stage Pump –The Flowserve LNNC is an axially split, double suction pump and is horizontally mounted with bottom suction and side discharge for maximum flexibility. Featuring 145 impeller and volute combinations, resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications.

Mark 3 Lo-Flo Overhung Chemical Process Pump – The Durco Mark 3 Lo-Flo pump is designed to improve pump reliability and performance in low-flow, high-head applications. Its innovative radial vane impeller and circular, concentric casing was developed to reduce radial loads and shaft vibration while extending bearing and mechanical seal life.

SMX Non-Metallic Standard Motor Overhung Industrial Process Pump – The SMX non-metallic motor pump is an overhung, end suction, close coupled tangential discharge, frame mounted design, engineered for general industry use.

Mark 3 Recessed Impeller, Overhung Chemical Process Pump – The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex action of a recessed impeller.

MJ Overhung, Vertical Lineshaft, Hard Metal Slurry Pump – The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and is suitable for a broad range of wet and dry pit applications.

VTP Vertical Turbine, Wet Pit Pump – The VTP vertical turbine pump is a diffuser type, single or multistage design for continuous service in wet pit and deep well applications. With more than 300 bowl and impeller designs, the VTP provides unsurpassed hydraulic coverage to ensure the best pump selection for a wide variety of services.

Mark 3 In-Line Overhung Chemical Process Pump – The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading Mark 3A power end and other Mark 3 advanced features for maximum Mean Time Between Planned Maintenance (MTBPM).

Downloads

Reviews

There are no reviews yet.

Be the first to review “Water Treatment”

Your email address will not be published. Required fields are marked *

Go to Top